3033 – Standard

Model 3033 – Standard

Rada 320 Thermostatic Mixing Valve supplied with integral risers for
simultaneous on/off control of both inlet supplies. The unit is
installed on a stainless steel hose rack that is suitable for wall or
column installation.

Model 3033 is also supplied with 25 feet (7.6 m) of white washdown
hose with “live” swivel adaptors and a Rubber-cushioned 10 gpm (37.8
lpm)-rated water saver spray nozzle with nozzle hook.

Armstrong hot and cold water hose stations replace the basic Mixing Y
with a Rada® 320 thermostatic mixing valve as the primary water
temperature controller. With the Rada 320 you can:

• Change outlet water temperature from full cold to the field-adjustable maximum limit stop in a single handle turn
• Set and lock to a single temperature and maintain outlet
  temperatures +/-2°F (1°C) in the event of inlet pressure and/or
  temperature fluctuation or change
• Protect the operator a thermal-shutdown feature if the cold water inlet supply fails

IMPORTANT NOTE: Thermostatic products used by our competitors for
this application cannot provide a temperature range from full cold to
the field-adjustable maximum limit stop. Nor can they access
temperatures within 5°F (2°C) of either inlet supply temperature.

Various hose lengths, spray nozzles and hose reels are available as options for Armstrong hot and cold water hose stations.

The Armstrong Hot & Cold Hose Stations – Standard series is
supplied fully assembled and pressure tested in the following
configurations. Go to the menu bar above for specific detail on each
model.