Follow us on Call us for support at 952-935-2345. After hours messages are monitored 24/7.

News & Events

Test Your Knowledge: Which Device Is It?


Test Your Knowledge: Which Device Is It?

Which of the following helps minimize water hammer, helps drains condensate, and minimizes temperature swings?

  1. Inverted Bucket Steam Trap
  2. Vacuum Breaker
  3. Fluid Air Coil
  4. Mechanical Condensate Pump
  5. Pilot Operated Regulating Valve

And the answer is...


2. Vacuum Breaker

A Vacuum Breaker is a simple, reliable device that allows air to enter a steam piping system when a vacuum is induced. When a steam system shuts down, the remaining steam condenses into water, which takes up a much smaller volume than the original steam. This creates a vacuum, which can lead to water hammer and tube damage if not relieved of in a timely way. 

Check out this video which shows the proper use of a vacuum breaker in a steam system.


Here are our top 4 reasons for including a vacuum breaker in your system:

  1. It helps allow for complete condensate drainage under all operating conditions: on/off or modulating applications. 
  2. It helps minimize water hammer. 
  3. It helps minimize temperature swings and uneven temperatures. 
  4. It helps minimize product waste.

All heat transfer components, whether shell-and-tube exchanger, plate-and-frame exchanger, air heating coil or any other device, require vacuum breakers. As the video shows, because the condensate piping after our coil is clear glass, you can watch condensate backing up into the coil without a vacuum breaker.  Once the vacuum breaker is allowed to operate, the coil can remain free of condensate under all operating conditions, which eliminates many issues that can shorten equipment service life and/or cause operation problems.

The footage for that video was taken in our Steam Training Room located in Minnetonka, Minnesota, where we have regular training classes.  We utilize a steam boiler, glass piping, and functional glass-bodied steam traps to describe and demonstrate a variety of steam basics and advanced concepts in the 4 main areas of a steam system: Generation, Distribution, Utilization, and Condensate Return.

Contact us for more information on the proper use of vacuum breakers or sign up for our Steam Energy Conservation seminars to learn more. 

 


No comments (Add your own)

Add a New Comment


code
 

Comment Guidelines: No HTML is allowed. Off-topic or inappropriate comments will be edited or deleted. Thanks.

Subscribe to our CS Update Newsletter: Send Me The Latest News

952-935-2345  emailmain@campbell-sevey.com  address15350 Minnetonka Blvd., Minnetonka, MN 55345

Products We Carry

GENERATION
  • Hot Water Boilers
  • Watertube Steam Boilers
  • Firetube Steam Boilers
  • Deaerators
  • Heat Recovery Steam Generators (HRSG’s)
  • Automatic Recirculation Valves
  • Economizers
  • Gas-Fired Water Heaters
  • Gas-Fired Humidifiers
  • Boiler/Generator Flue Stacks
  • Continuous Emissions Monitors (CEMS)
DISTRIBUTION
  • Pressure Reducing Valves
  • Safety and Relief Valves
  • Control Valves
  • Pressure Independent Control Valves
  • Expansion Joints, Guides, Anchors
  • Flash Tanks
  • Flow Meters
  • Balancing Valves
  • Check Valves
  • Separators
  • Pumps
  • Pressure Booster Systems
  • Piston Valves
UTILIZATION
  • Heating/Cooling Coils
  • Plate and Frame Heat Exchangers
  • Shell and Tube Exchangers
  • Water Heaters
  • Steam Humidifiers
  • Vacuum Systems
  • Condensers
  • Steam Traps
  • Wireless Steam Trap Monitors
  • Tube Bundles
  • Direct Gas-Fired Space Heaters
  • Direct Gas-Fired Make-Up Air Units
  • Unit Heaters
  • Strainers
  • Air Vents
  • Liquid Drainers
  • Heat Transfer Packages
  • Digital Water Mixing Valves
  • Air Cooled Condensers/Dry Coolers
  • Steam Filters
RETURN
  • Electric Condensate Pumps
  • Steam/Air-Powered Condensate Pumps
  • Packaged Condensate Pump Skids